제품소개

Consumable

[Filter] Aqueous IFD & Solvent IFD
관리자 2021-10-26 16:36:41
0 6

32.jpg

 

PoThe Aqueous IFD has a 0.2 µm hydrophilic nylon membrane for use with aqueous-based mobile phases. Solvent IFD has a 0.2 µm high-flow polypropylene membrane for mobile phases containing organic solvents. Both devices have a polypropylene housing, the circumference of which is sealed by a security ring, fittings to accommodate 1⁄16”-1⁄8” tubing and an air vent on the inlet with luer lock cap to enable priming.
The in-line filters work on the principle of ‘bubble point’ – the point of pressure at which gases will pass through a wet membrane. If pressure is maintained below the bubble point, the gas will not pass through the membrane and is trapped by the particular filter device.

 
사양 - Aqueous IFD & Solvent IFD
  Aqueous IFD Solvent IFD
Bubble point*
bar
psi
2.9 (a)
42 (a)
0.76 (b)
11.0 (b)
Maximum flow rate† 2.5 ml/min 2.5 ml/min
Filtration area 16 cm2 16 cm2
* Typical values determined with (a) water and (b) ispropanol
† For effective gas bubble removal in HPLC
 
In Ordering Information - Aqueous IFD and Solvent IFD
Catalog Number Description
6726-5002 Aqueous IFD, 0.2 µm, 50 mm, nylon, 10/pk
6725-5002 Solvent IFD, 0.2 µm, 50 mm, polypropylene, 10/pk
6726-5002A Aqueous IFD, 0.2 µm, 50 mm, nylon, 10/pk
6725-5002A Solvent IFD, 0.2 µm, 50 mm, polypropylene, 10/pk
6726-5000 IFD End Fitting Kit, 10/pk
 
PoThe Aqueous IFD has a 0.2 µm hydrophilic nylon membrane for use with aqueous-based mobile phases. Solvent IFD has a 0.2 µm high-flow polypropylene membrane for mobile phases containing organic solvents. Both devices have a polypropylene housing, the circumference of which is sealed by a security ring, fittings to accommodate 1⁄16”-1⁄8” tubing and an air vent on the inlet with luer lock cap to enable priming.
The in-line filters work on the principle of ‘bubble point’ – the point of pressure at which gases will pass through a wet membrane. If pressure is maintained below the bubble point, the gas will not pass through the membrane and is trapped by the particular filter device.
 
사양 - Aqueous IFD & Solvent IFD
  Aqueous IFD Solvent IFD
Bubble point*
bar
psi
2.9 (a)
42 (a)
0.76 (b)
11.0 (b)
Maximum flow rate† 2.5 ml/min 2.5 ml/min
Filtration area 16 cm2 16 cm2
* Typical values determined with (a) water and (b) ispropanol
† For effective gas bubble removal in HPLC
 
In Ordering Information - Aqueous IFD and Solvent IFD
Catalog Number Description
6726-5002 Aqueous IFD, 0.2 µm, 50 mm, nylon, 10/pk
6725-5002 Solvent IFD, 0.2 µm, 50 mm, polypropylene, 10/pk
6726-5002A Aqueous IFD, 0.2 µm, 50 mm, nylon, 10/pk
6725-5002A Solvent IFD, 0.2 µm, 50 mm, polypropylene, 10/pk
6726-5000 IFD End Fitting Kit, 10/pk
목록
PLUS
관리자 로그인
회원가입