"BANDELIN" SONOREX DIGITAL 10 P, Digital Ultrasonic Cleaners with 10-program Data memory. - Instrument

PLUS

제품소개

Instrument

[세척기&건조기&멸균기] "BANDELIN" SONOREX DIGITAL 10 P, Digital Ultrasonic Cleaners with 10-program Data memory.

관리자 2021-10-28 14:07:04

0 67

■ 용도(Applications)

* The SONOREX DIGITAL range - with volumes from 3.0 to 28.0 litres.

* Working with SONOREX DIGITAL 10 P is more comfortable and precise through user-friendly high-power ultrasound, integrated in digital ultrasound baths.

* You select: time, temperature, power and DEGAS and store up to 10 variations.

* Exact setting of all parameters guarantees reproducible results.

* When switching off the unit, the data is stored automatically.

* 탈가스화, 화학반응의 가속화, Plazma와 Sera혼합, 에멀젼화, 시료의 균질화, 각종 분석용 시료 준비시

■ 제품특징(Features)

* PZT-large area oscillating systems

* HF-Frequency 35 kHz

* Time setting between 1 to 99 min and continuous operation. Interruption is possible at any time.

* Display of the remaining time.

* Built-in heating, thermostatically adjustable between 20 to 80 °C (68 to 176 °F)

* Integrated thermometer, accuracy ± 1.5 °C.

* Power setting from 10 to 100 %, microprocessor control

* Oscillating tank of stainless steel

* Housing of stainless steel - drip proof

* Foil keypad

* Drain cock for easy emptying (from DK 156 BP upward)

* Mains connection 230 V~, 50/60 Hz

* SONOREX DIGITAL units are RFI-proof and CE marked.

* PZT-DML-disc in a large area oscillating system ; produce the highest ultrasonic intensity

* With 10-programme data memory

* Easy-care and drip-proof stainless steel housing

* For various applications ; Degassing of liquids, Accelerating chemical reactions, Mixing plasma and sera, Emulsifying, Homogenizing of

samples, and Preparation of samples for analysis.

* SONOREX DIGITAL 10P is more comfortable and precise due to exact setting of all parameters which are adhered to during the entire process.

* All results are reproducible. Data are stored automatically when the unit is switched off.

* 10개의 프로그램 메모리,디지털, 35kHz의 유일한 제품(강력한 효과)

* 아래의 Parameters가 정확히 설정되므로 개연성있는 결과를 얻을 수 있다.

ㆍ작업시간 : 1~99 min + 연속작동

ㆍ온도설정 : 20~80℃, Accuracy ±1.5℃, Display real bath temp. & selected temp.

ㆍ초음파 세기 : 10~100%, Microprocessor control.

ㆍDegas : rapid degassing of liquids.

* Switch off시 자동적으로 작업내용 저장.

* PZT-DML-transducers는 Oscillating tank 전체에 걸쳐 최강의 초음파 생성.

* 안전한 Drip-proof stainless steel housing.

* RFI-proofed and CE-marked, 220V/60Hz.

* Basket, Lid등의 Accessories는 별도(Option)임.

■ 규격 (Specifications)

Internal tank dimensions ( l × w × d)mm	Capacity litres	Model	Code no.	Drain ball cock	HF-peak output max. W/per.	Heater power W	Current consump- tion A	External dimensions (l × w × h)mm	Weight
Internal tank dimensions ( l × w × d)mm	Capacity litres	Model	Code no.	Drain ball cock	HF-peak output max. W/per.	Heater power W	Current consump- tion A	External dimensions (l × w × h)mm	net kg	gross kg
240 × 140 × 100	3.0	DK 102 P	780	-	2 × 240	140	1.2	260 × 160 × 250	4.5	5.4
500 × 140 × 150	9.0	DK 156 BP	781	1/4"	2 × 450	600	3.6	530 × 165 × 300	7.6	9.1
300 × 150 × 150	5.7	DK 255 P	782	1/4"	2 × 320	280	2.0	325 × 175 × 305	6.0	7.3
300 × 240 × 200	13.0	DK 512 P	783	1/2"	2 × 450	400	2.7	325 × 265 × 350	8.8	10.8
325 × 300 × 200	18.7	DK 514 BP	784	1/2"	2 × 450	600	3.6	355 × 325 × 385	10.2	12.5
500 × 300 × 200	28.0	DK 1028 P	786	1/2"	2 × 600	1300	7.0	535 × 325 × 400	15.2	18.6

* Voltage : 220 V / 60 Hz.
* Type
BA.780 : DK102P
BA.781 : DK156BP
BA.782 : DK255P
BA.784 : DK514BP
BA.786 : DK1028P
* Contents Lit.
BA.780 : 3.0
BA.781 : 7.5
BA.782 : 5.4
BA.784 : 17.0
BA.786 : 26.0
* Interior tank dimension(L x w x d) mm
BA.780 : 240 x 140 x 100
BA.781 : 500 x 135 x 150
BA.782 : 300 x 150 x 150
BA.784 : 325 x 300 x 200
BA.786 : 500 x 300 x 200
* Drain Cock
BA.781 : 1/4"
BA.782 : 1/4"
BA.784 : 1/2"
BA.786 : 1/2"
* Peak output max.W/Per
BA.780 : 2 x 240
BA.781 : 2 x 300
BA.782 : 2 x 320
BA.784 : 2 x 450
BA.786 : 2 x 600
* Heating capacity W
BA.780 : 140
BA.781 : 600
BA.782 : 280
BA.784 : 600
BA.786 : 1300
* Connected load A
BA.780 : 1.1
BA.781 : 3.3
BA.782 : 1.9
BA.784 : 3.6
BA.786 : 7.0

Overview on 3 ultrasonic baths
Features
	DIGITEC	SUPER	DIGITAL 10 P	LONGLIFE
Tank volume (litres)	0.9 ~90.0	0.9 ~58.0	3.0 ~28.0	1.9 ~90.0
Control elements	push-buttons	turning knobs	push-buttons	turning knobs
Time setting (min)	1~30, continuous operation∞	1~5, continuous operation∞	1~9, continuous operation ∞	1~5, continuous operation∞
Safety shut-down	after 12 hours	no	no	no
Heating	optional, version "H"	optional, H-Version	yes	yes
Heating, thermostatically adjustable	20 ~80 °C	30 ~80 °C RK 31 H: 65 °C fi xed	20 ~80 °C	30 ~80 °C
Excess temperature signal	yes	no	no	no
Protection against delay in boiling	yes, optionally switch-on	no	no	no
Setting accuracy of bath temperature	± 3.5 K	± 5 K	± 1.5 K	± 5 K
Thickness of stainless steel	0.8 mm. AISI 314	0.8 mm. AISI 304	0.8 mm. AISI 304	-
tank material
version "C"	2 mm. AISI 316 Ti	2 mm. AISI 316 Ti	-	2 mm. AISI 316 Ti
Marking of filling level for safe dosage	yes	yes	yes	yes
Hard chromium-plated	DT 102 H	RK 102 H	no	no
	normal,	normal,
Lifetime	extended: version "C"	extended:	normal	extended
	hard chromium-plated	hard chromium-plated
Warranty period (years)	2, DT 102 H = 3	2, RK 102 H = 3	2	3
One-piece drain, welded	yes, from DT 100 SH	yes, from RK 100 SH	yes, from DK 156 BP	yes, from RK 102 CH
Liquid protection	protected against spray	drip-proof	drip-proof	drip-proof
Degree of protection	IP 33	IP 32	IP 32	IP 32
Ultrasonic frequency (kHz)	35	35	35	35
Sweep	yes	yes	no	yes
Power adjustment	no	no	yes	no
PCT-transducers (PCT = lead circonate titanate)	yes	yes	yes	yes
Fast degassing	yes	no	yes	no
Mains supply 230 V~, 50/60 Hz	yes	yes	yes	yes
alternatively: mains supply 115 V~, 50/60 Hz	yes	yes	no	yes
Data memory	1 program (type H-RC)	no	10 programs	no
Interface	RS 232, type H-RC	no	no	no
PC software	yes	no	no	no
CE marked as medical device	yes, except for DT 1050 / CH	yes, except for RK 1050	no	yes, except for RK 1050 CH
For units with larger volumes (SONOREX TECHNIK) see last page.

SONOCOOL 255
Code No. 3500
*Consisting of:
*Ultrasonic device, sample holder PH 255, for 8 inset beakers,
*lid D 255 G, 10 inset beakers SD 01 à 100 ml, TICKOPUR TR 3
*(concentrate for producing the contact liquid) - 250 ml
Vorteile
* compact design
* increased life span by welded tank: stainless steel AISI 316Ti, 2 mm thick
* lid made of glass for easy cleaning and sample observation
* level sensor for contact liquid as dry run protection
* lighted LCD display for remaining time – actual temperature – pause/diagnostics – set time/set temperature – ultrasonic power
* serial interface for remote control
* Inset beaker SD 01100 ml, with ring(package à 10 pieces) Code No. 3516
Accessories
* Sample holder PH 255 for 8 inset beakers SD 01 Code No. 3511
Decalcifi cation of bone tissue in pathology
Decalcifying of bone tissue is an important step of histological preparation of samples (e.g. in oncology).
Only decalcifi ed samples can be used artefact-free for followed diagnosis.
Compared to standard methods, the processing time is extremely shortened.
- no destroying of the morphologic structure of samples
- quantity of aggressive decalcifying liquids is reduced
- faster results of diagnosis
Use in analysys laboratories
With SONOCOOL® the cathalytic effect of ultrasound
can also be used when sonicating temperature-sensitive samples.
Exotherm reactions are possible because of the integrated cooling system, processes are faster and more effective.
SC 255
Technical data
* Inner tank dimensions: 280 × 150 × 150 mm (l × w × d)
* Tank volume: 5 litres (contact liquid)
* Adjustable bath temperature: 15 – 30 °C (at 20 °C room temperature)
* Cooling power: 200 W
* Ultrasonic power: 180 W, adjustable in 4 steps
* Ultrasonic frequency: 35 kHz, SweepTec®
* Countdown operation: up to 100 h
* External dimensions: 360 × 605 × 385 mm (l × w × d)
* Housing: aluminium: coated with fl ush pulls (grips recessed inside the housing)
* Outlet: front left, concealed
* Current consumption: 1.6 A
* Mains connection: 230 V~, 50/60 Hz
* Weight: 27.5 kg

Type	RK 31 / H	RK 52 / H	RK 100 / H	RK 102 CH	RK 103 H
	DT 31 / H	DT 52 / H	RK 102 H, DK102 P		DT 103 H
Accessories			DT 100 / H DT 102 H / H-RC
Lids, s/s	D 08	D 52	D 100	D 100	D 100
Insert baskets, s/s l × w × h (mm)	K 08 170 × 65 × 50	K 1 C 120 × 110 × 40	K 3 C 200 × 110 × 40	K 3 C 200 × 110 × 40	K 3 CL 200 × 110 × 40
Insert baskets, plastic l × w × h (mm)	-	PK 1 C 90 × 90 × 66	PK 2 C 187 × 90 × 56	PK 2 C 187 × 90 × 56	PK 3 C 187× 90 × 56
Utensil holders l × w × d (mm)	-	GH 1 129 × 117	GH 1 129 × 117	GH 1 129 × 117	GH 1 129 × 117
Insert tubs l × w × d (mm)	-	-	KW 3 195 × 115 × 88	-	KW 3 195 × 115 × 88
Positioning lids	DE 08	DE 52	DE 100	DE 100	DE 100
Type	RK 510 / H	RK 512 H / CH	RK 514 / H	RK 514 BH	RK 515 CH
	DT 510 / H / H-RC	DT 512 H	DT 514 / H	DT 514 BH / BH-RC
Accessories		DK 512 P		DK 514 BP
Lids, s/s	D 510	D 510	D 514	D 514	D 510
Insert baskets, s/s l × w × h (mm)	K 10 250 × 195 × 50	K 10 B 250 × 195 × 50	K 14 275 × 245 × 50	K 14 B 275 × 245 × 50	K 15 C 250 × 190 × 50
Insert baskets, plastic l × w × h (mm)	-	-	K 14 P 230 × 250 × 45	-	-
Utensil holders l × w × d (mm)	GH 10 260 × 200	GH 10 B 260 × 200	-	GH 14 B 280 × 250	-
Insert tubs l × w × d (mm)	KW 10-0 242 × 182 × 136	-	KW 14 280 × 215 × 145	KW 14 B 275 × 210 × 195	-
Positioning lids Beaker holder	DE 510	DE 510	DE 514	DE 514	DE 510

Accessories	RK 103 CH	RK 106 DT 106	RK 156 DT 156	RK 156 BH DK 156 BP DT 156 BH	RK 255 / H DT 255 / H / H-RC DK 255 P	RK 255 CH
Lids, s/s	D 100	D 6	D 156	D 156	D 255	D 255
Insert baskets, s/s l × w × h (mm)	K 3 CL	K 6	K 6 L	K 6 BL	K 5 C	K 5 C
Insert baskets, plastic l × w × h (mm)	200×110×40	Ø 215 x 50	460×100×50	460×100× 50	260×110×40	260 × 110 × 40
Utensil holders l × w × d (mm)	PK 3 C 187 × 90 × 56	-	-	-	K 5 P 254 × 96 × 130	-
Insert tubs l × w × d (mm)	GH 1 129 × 117	-	-	-	GH 5 270 × 120	-
Positioning lids	-	-	-	-	KW 5 254 × 96 × 130	-
Type	DE 100	DE 6	DE 156	DE 156	DE 255	DE 255
	RK 1028 / H DT 1028 / H DK 1028 P	RK 1028 C RK 1028 CH DT 1028 CH	RK 1040	RK 1050 DT 1050	RK 1050 CH DT 1050 CH
Accessories	D 1028	D 1028 C	D 40	D 1050 C	D 1050 C
Lids, s/s	K 28	K 28 C	K 40	K 50	K 50 C
Insert baskets, s/s l × w × h (mm)	455 × 245 × 50	455 × 245 × 50	Ø 480 × 50	545 × 450 × 50	545 × 450 × 50
Insert baskets, plastic l × w × h (mm)	K 28 P 420 × 200 × 45	-	-	-	-
Utensil holders l × w × d (mm)	GH 28 455 × 250	GH 28 C 455 × 250	-	-	GH 50 C 550 × 455
Insert tubs l × w × d (mm)	KW 28-0 437 × 230 × 155	KW 28-0 437 × 230 × 155	-	KW 50-0 517 × 445 × 184	KW 50 B-0 520 × 445 × 284
Positioning lids Beaker holder	ES 4	ES 4	-	ES 4	ES 4