Instrument
| ■ | 용도(Applications) |
|---|---|
| - 3가지 액세서리 Light Guide 가능 | |
| - 튼튼한 소형 디자인 | |
| - 광범위 250nm에서 400nm방사 |
| ■ | 특징(Features) |
|---|---|
| - 365nm의 피크 파장을 가진 조절 가능한 UV(자외선)에너지를 제공합니다. | |
| - 스펙트럼의 Long Wave UV-A 부분은 빠른 UV 활성화된 재질에 가장 유효하고 안전합니다. | |
| - 이램프는 어떤램프와도 비교해도 자장 높은 UV 농도를 보냅니다. | |
| - 광원은 경량의 외형에 따른 하우징을 포함하여 완벽한 균형을 제공합니다. | |
| This light gun maximizes the efficiency of applications involving ultraviolet light curing adhesives and materials. Designed for exposing small areas of UV adhesives in bonding applications such as fiber optic connections, electro-optics, lens assembly, PC board coatings, wire tacking and more. The time required for a typical bonding can be reduced from 15 minutes to a matter of a few seconds. Features a halogen lamp with a minimum output of 25 mW/cm2 in the 340-380nm range at a 1" distance. First trigger pull turns the unit on and audible tones will occur every 10 seconds untial a second trigger pull turns it off. Bulb life is over 100,000 twenty-second curing cycles. The light is focused into an 84mm long curved tip fiber optic light guide, 11mm in diameter (replacement light guide is #57-471). Probe end should not come in contact with adhesive. Emits a safe, cool beam of UV light (250-400nm range). Environmentally protected housing, thermal overload protection, and filtered to block energy outside UV range. Includes power supply and gun-mounted holder. |
| ■ | 규격(Specifications) | ||||
|---|---|---|---|---|---|
| Description | NT55-160 | ||||
| Dimension | Control Box W 10"x D9.5" x H5.5" | ||||
| Max Output | 90mw/cm2 at 365nm at1/8" distance (Typical) | ||||
| Weight | Gun:10oz, Control Box 5ibs | ||||
| Power Input | 120V,50/60hz, 75watts(lamp) | ||||
| Timer | Continuous with audible tones every 10 seconds | ||||
| Accessories | ||||
|---|---|---|---|---|
| Description | RoHS | Stock No. | ||
| Accessory Curved Tip Light Guide (11mm Dia. x 84mm L) | Not Compliant | NT57-471 | ||
| Accessory Curved Tip Light Guide (3mm Dia. x 70mm L) | Not Compliant | NT57-472 | ||
| Accessory Curved Tip Light Guide (8mm Dia. x 70mm L) | Not Compliant | NT57-473 | ||
| Replacement Battery Charger for LED Curing Gun | Not Compliant | NT59-285 | ||
| Replacement Battery for LED Curing Gun | Not Compliant | NT59-284 | ||
| Replacement Bulb for Halogen UV Curing Gun | Not Compliant | NT36-431 | ||
| Replacement Light Guide for LED Curing Gun | Not Compliant | NT59-286 | ||
| Replacement Nose Cone for LED Curing Gun | Not Compliant | NT59-287 | ||
'Newton Press" Automatic Oil Press...
Accessories
Accessories
"GLAS-COL" Dry Powder Rotator...
Accessories
"DHSLKOREA" Seperatory Funnel...
Accessories
Cascada™ IX-water Purification System
Accessories
Accessories
WM 모듈 (MODULO WM Weighing Modules)
Accessories
Cascada™ AN-water Purification System
Accessories
Cascada™ BIO-water Purification System
Accessories
Accessories
Accessories
Accessories
Accessories
Accessories
Accessories
Accessories
Accessories
Accessories
FlexInject Manual Dual Injector Module
Accessories
Accessories
Accessories